Polished Stainless Steel CF3M Precision Investment Casting Valve Body With NDT Test

Quick Detail:

1.   Precision castings of valve body applied in marine and oil industry, corrosion resistant material CF3M.

2.   Exporting to Europe and North American;

3.   Shot blasted and electropolished;

4.   Max size: 500X500X350mm;

5.   Max Weight: 80kg;

6.   Chemical composition tested by German spectrometer;

7.   PED and ISO9001:2008 certificated;

8.   NDT test available (Dye test, X ray test etc).
 
 

Description:

Lost wax investment casting parts of a train component.
 
We cast a wide range of materials: stainless steel, carbon steel, duplex alloys, nickel-based materials, and more:

OVERVIEW OF INVESTMENT CASTING PROCESS

 
Investment casting, often called lost wax casting, is regarded as a precision casting process to fabricate near-net-shaped metal parts from almost any alloy. The most common use of investment casting in more recent history has been the production of components requiring complex, often thin-wall castings.
 
The investment casting process begins with fabrication of a sacrificial pattern with the same basic geometrical shape as the finished cast part. Patterns are normally made of investment casting wax that is injected into a metal wax injection die. Once a wax pattern is produced, it is assembled with other wax components to form a metal delivery system , called the gate and runner system. The entire wax assembly is then dipped in a ceramic slurry, covered with a sand stucco, and allowed to dry. The dipping and stuccoing process is repeated until a shell of ~6-8 mm is applied.
 
Once the ceramic has dried, the entire assembly is placed in a steam autoclave to remove most of the wax. After autoclaving, the remaining amount of wax that soaked into the ceramic shell is burned out in a furnace. At this point, all of the residual pattern and gating material is removed, and the ceramic mold remains. The mold is then preheated to a specific temperature and filled with molten metal, creating the metal casting. Once the casting has cooled sufficiently, the mold shell is chipped away from the casting. Next, the gates and runners are cut from the casting, and final postprocessing (sand blasting, machining) is done to finish the casting.
 
 

Applications:

 
Pumps
Valves
Pipe Fittings
Automotive
Marine and Oil
Machinery
Power & Energy
 
 

Specifications:

 
Competitive Advantage:

One-stop Services of Winnington Casting

From wax die making, wax injection, pouring, secondary machining, welding, heat treatment, polishing, surface finishing etc.

By injecting wax into a permanent-molding die to form a pattern, investment casting get casting parts of good surface quality and became the solution for man